PLATE AND FRAME HEAT EXCHANGER SPECIFICATIONS

1	COMPANY: FERMI NATIONAL ACCELERATOR LABORATORY
2	LOCATION: KIRK & WILSON ROADS, BATAVIA, ILLINOIS 60510
3	SERVICE OF UNIT: TO REMOVE HEAT FROM DEIONIZED COOLING WATER
4	PROPOSAL NO.
5	DATE: 07/09/01
6	SIZE:	TYPE: TEMA NEN		CONNECTED IN PARALLEL SERIES
7	SURF/UNIT (GROSS/EFF.) SQ FT; SHELLS/UNIT SURF/SHELL (GROSS/EFF.) SQ FT
8	PERFORMANCE OF ONE UNIT
9	FLUID ALLOCATION				(IN) PLATE (OUT)				(IN) PLATE (OUT)
10	FLUID NAME				LCW				CLOSED CIRCUIT WATER
11	FLUID QUANTITY (lb/hr)
12	FLUID QUANTITY (GPM)				60		60		60	60
13	TEMPERATURE (°F)				110		100		90	100
14	DENSITY (lbm/ft^3)
15	VISCOSITY (lb*sec/ft^2)
16	SPECIFIC HEAT (BTU/lb*°F)
17	THERMAL CONDUCTIVTIY (BTU/hr*ft^2*°F)
18	INLET PRESSURE (PSIA)
19	FLUID VELOCITY (ft/sec)
20	PRESSURE DROP (Allowable/Calculated) (PSI)				5/				5/
21	FOULING FACTOR (hr*ft^2*°F/BTU)				0.0005				0.0005
22	HEAT EXCHANGED (BTU/hr): 682429
23	TRANSFER RATE, SERVICE (BTU/hr*ft^2°F)
24
25	FLUID ALLOCATION				PLATE 1				PLATE 2
26	DESIGN PRESSURE (PSIG) MIN/MAX				5/42				120/200
27	DESIGN TEMPERATURE (°F)				150				150
28	NUMBER OF PASSES				N/A				N/A
29	CORROSION ALLOWANCE (in.)				NONE				NONE
30	CONNECTION INPUT SIZE AND RATING				3” – 150#				3” – 300#
31	CONNECTION OUTPUT SIZE AND RATING				3” – 150#				3” – 300#
32	TUBE NO.	O.D.: 0.625”		WALL THICK.: 0.049”				LENGTH
33	TUBE TYPE:		MATERIAL: SA-249 TYPE 304 S.S.			PATTERN:
34	SHELL:. ID OD IN			SHELL COVER
35	CHANNEL: CARBON STEEL			CHANNEL COVER:
36	TUBESHEET- STATIONARY:			TUBESHEET- FLOATING:
37	FLOATING HEAD COVER			IMPINGEMENT PROTECTION:
38	BAFFLES-CROSS: TYPE			%CUT (DIAM/AREA) SPACING: c/c INLET
39	BAFFLES-LONG:			SEAL TYPE
40	SUPPORTS-TUBE		U-BEND			TYPE
41	BYPASS SEAL ARRANGEMENT			TUBE-TO-TUBESHEET JOINT:
42	EXPANSION JOINT			TYPE
43	pV^2- INLET NOZZLE		BUNDLE ENTRANCE			BUNDLE EXIT
44	GASKETS: NON-ASBESTOS
45	FLOATING HEAD
46	CODE REQUIREMENTS: ASME SECTION VIII, DIVISION 1; TEMA CLASS C – TYPE NEN
47	WEIGHT/SHELL		FILLED WITH WATER			BUNDLE